DESCRIPTION
Features:
Trans is a transparent sealing adhesive based on MS polymers, offering excellent adhesion and gluing applications. Trans continues to be elastic, watertight and fungus resistant. Additionally, Trans can be painted on immediately and offers excellent adhesion, even on damp surfaces.
- Ideal on natural stone
- Over paintable with most common lacquers.
Technical Information:
- Nature: elastic
- Viscosity: paste-like
- Colour: crystal clear
- Flow: 5 bar / 3 mm / 23°C 160 g/min
- Skin formation: 23°C 50% R.H. 5 minutes
- Tack-free: 23°C 50% R.H. 40 minutes
- Full hardening: 23°C 50% R.H.
- 24h - 4 mm
- 48h - 5 mm
- 72h - 8 mm
- Hardness - DIN 53505: 40 Shore A
- Volume shrinkage after curing: < 2%
- Tensile strength: 220 N/cm²
- Tear strength - DIN 53507: ca. 40N/cm²
- Thermal stability:
- -30°C to +95°C
- peak: 155°C - max. 30 minutes
- Adhesion:excellent on (among other things) tiles, cement, natural stone, wood, concrete, aluminium, with the exception of PP, PE, PTFE and bitumen
- Elongation at break - DIN 53504: 400%
- UV-resistance: over time discolouring can develop due to external influences
- Overpaintable: OK with most solvent- and water-based lacquers
- Chemical resistance:
- good: water, seawater, aliphatic solvents, greases, diluted organic acids, lyes, oils
- moderate: esters, ketones, aromatics
- poor: concentrated acids, chlorinated solvents
- Pressure resistance (ISO 11432): 0,84 N/mm²
Instructions:
- Processing temperature from +5°C to +40°C.
- Apply to clean, dust and grease-free substrate.
- If necessary clean with Tec7 Cleaner or Multiclean.
- Apply with manual or air caulking gun (best with telescopic plunger).
- Test the adhesion to plastics, powder coatings, exotic woods and bituminous materials. Start by strengthening weak and/or porous substrates with Fixprimer.
- Alkyd resin will harden slowly.
- Use Tec7 Cleaner to clean and degrease safely, obtain the perfect finish, and to remove uncured Tec7 polymeres. Use HP Clean to finish porous materials.
When gluing mirrors in sanitary facilities only apply vertical strips of adhesive to avoid stagnant moisture due to condensation. Ideal adhesive thickness for optimal adhesion strength: 3mm.