DESCRIPTION

• Rated surge voltage: 8 kV
• Degree of pollution: 3
• Overvoltage category: III
• Insulating material group: I
• Maximum power dissipation for nominal condition: 1.31 W
• Maximum load current: 52 A (with 10 mm² conductor cross section, rigid)
• Nominal current IN: 41 A
• Nominal voltage UN: 1000 V
• Open side panel: Yes
• Shock protection test specification: DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection: guaranteed
• Finger protection: guaranteed
• Result of surge voltage test: Test passed
• Surge voltage test setpoint: 9.8 kV
• Result of power-frequency withstand voltage test: Test passed
• Power frequency withstand voltage setpoint: 2.2 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection): Test passed
• Result of flexion and pull-out test: Test passed
• Bending test rotation speed: 10 rpm
• Bending test turns: 135
• Bending test conductor cross section/weight:
• 0.5 mm² / 0.3 kg
• 6 mm² / 1.4 kg
• Tensile test result: Test passed
• Conductor cross section tensile test: 0.5 mm²
• Tractive force setpoint: 20 N
• Conductor cross section tensile test: 6 mm²
• Tractive force setpoint: 80 N
• Conductor cross section tensile test: 10 mm²
• Tractive force setpoint: 90 N
• Result of tight fit on support: Test passed
• Tight fit on carrier: NS 35
• Setpoint: 5 N
• Result of voltage-drop test: Test passed
• Requirements, voltage drop U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
• Result of temperature-rise test: Test passed
• Requirement temperature-rise test: Increase in temperature ≤ 45 K
• Short circuit stability result: Test passed
• Conductor cross section short circuit testing: 6 mm²