Sort by:

Tec7 Glue, Mount And Seal BLACK 310ml

PRODUCT CODE: TECH7BLACK
In stock
Tec7 Glue, Mount And Seal BLACK 310ml
  • fast curing
  • permanently flexible and resists vibrations
  • applicable both indoors and outdoors
  • cures shrink-free
1 Day
£9.70

DESCRIPTION

Glue, Mount & Seal... Even On Applications Underwater.
WHY USE TEC7
For all applications: in the construction and sanitary sectors and general maintenance. Tec7 replaces mounting, wood and PU adhesive, silicone sealant, sanitary silicone sealant, acrylate adhesive, butyl caulking. As a universal adhesive, Tec7 adheres to most substrates and does not attack synthetic materials. To mirrors (vertical adhesive beads), natural stone (does not bleed through), polyester, polystyrene foam, moist substrates, even under water. Overpaintable with most common paints. Alkyd resin-based lacquer, applied to Tec7, can have a slower drying process. Tec7 has lower adhesion on PP, PE, bitumen and silicones.
FEATURES
Tec7 the original all-rounder. For more than 20 years now, Tec7 has been the best-known sealant for bonding, sealing and fastening. When it really has to be good, professionals and experienced handymen reach for the Tec7 tube. And rightly so!
Tec7 is the first choice for 80% of all applications. Tec7 replaces mounting, wood and PU adhesive, silicone sealant, acrylate adhesive, etc.
  • fast curing
  • permanently flexible and resists vibrations
  • applicable both indoors and outdoors
  • cures shrink-free
Technical Information:
  • Flow: 5 bar/ 3 mm/ 23°C 140g/min
  • Skin formation: 23°C 50% R.V. 8 minutes
  • Tack-free: 23°C 50% R.V. 25 minutes
  • Full hardening: 23°C 50% R.V. 24h - 6 mm
  • 48h - 7 mm
  • 72h - 8 mm
  • E-modulus 100%: after 7 days: 170 N/cm² - after 1 months: 170 N/cm² - after 3 months: 180 N/cm².
  • Electric resistance: 2,6 x 10//BS10//ES Ω/cm
  • Volume shrinkage after curing: < 3%
  • Hardness - DIN 53505: 60 Shore A
  • Tensile strength: after 7 days: 260 N/cm² - after 1 months: 280 N/cm² - after 3 months: 310 N/cm².
  • Tear strength - DIN 53504: 140N/cm² /1.40 Mpa
  • The ambient temperature for application: between +5°C and +40°C
  • Thermal stability: -30°C to +95°C /peak: 155°C max. 30 minutes
  • Elongation at break - Din 53504: > 350%.
  • Air permeability (according to report 3P02093 of the SP TRI in Sweden: >0,2m³/m²
  • Non-toxic
  • Chemical resistance:
    • good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes
    • moderate: esters, ketones, aromatics.
    • poor: concentrated acids, chlorinated solvents, chlorine of swimming pools
  • Pressure resistance (ISO 11432): 1,19 N/mm²
  • Shelf life: 12 months
Instructions
  • Processing temperature from +5°C to +40°C.
  • Apply to clean, dust and grease-free substrate.
  • If necessary clean with Tec7 Cleaner or Multiclean.
  • Apply with manual or air caulking gun (best with telescopic plunger).
  • Test the adhesion to plastics, powder coatings, exotic woods and bituminous materials. Start by strengthening weak and/or porous substrates with Fixprimer.
  • Alkyd resin will harden slowly.
  • Use Tec7 Cleaner to clean and degrease safely, obtain the perfect finish, and to remove uncured Tec7 polymers. Use HP Clean to finish porous materials.
  • When glueing mirrors in sanitary facilities only apply vertical strips of adhesive to avoid stagnant moisture due to condensation.
  • Ideal adhesive thickness for optimal adhesion strength: 3mm.
  • Use in jointing and sealing:
TEC7 BLACK
EAN: 5414195551967