DESCRIPTION
Fire & Carbon Monoxide Battery Powered Alarm Wireless Interconnect RadioLINK Module Ei208WRF
- Proven electrochemical sensor (7 year operational life)
- Powered-for-Life sealed lithium battery
- RF module communicates with other RadioLINK enabled CO alarms
- End of life indication
- Easy to use large Test/Hush button
- Pre-alarm indication gives early warning of CO
- Each alarm has a loud distinct sound (85 dB(A) minimum at 3m)
- Memory feature indicates if CO has been previously detected
- Power, alarm and fault indicator lights
- 5 Year guarantee (limited)
- Interconnected alarms will all sound if CO is detected by any alarm
The Ei208WRF Carbon Monoxide (CO) alarm is supplied with a powered-for-life sealed lithium battery and an RF interconnect module. Using the unique house code feature, an interconnected system will sound all alarms when one detects CO.
The alarm has a high performance, proven electrochemical sensor to sense CO presence. The sensor is individually calibrated and tested in Carbon Monoxide (CO) gas to ensure accuracy.
The memory feature records the last CO alarm level and can be useful to check if CO has been present while the home owner or tenant was absent from the property. An easy to use Test/Hush button allows the user to check the alarm. This checks all aspects of the alarm (sensor, electronics, battery and sounder).
The alarm has an “End of Life” indicator which will notify the user when the alarm needs replacing at the end of its 7 year operational life.
The alarm has a twist on mounting base which has multiple fixing points so it can easily be secured to a ceiling or wall. The fixing screws are supplied with the alarm.
| CO Level |
Red Led |
Horn |
| < 43 ppm |
Off |
Off |
| 43 to 80 ppm |
1 flash every 2 seconds |
On after 60 - 90 mins |
| 80 to 150 ppm |
1 flash every second |
On after 10 - 40 mins |
| >150 ppm |
2 flashes every second |
On within 2 minutes |
- The RadioLINK module will transmit the alarm signal to other RadioLINK enabled CO alarms
- The alarm will automatically clear when CO gas clears
- An ‘End of Life’, sensor failure or low battery condition will be notified by visual and audible indicators
- Test/Hush button operation:
- When ‘pressed and held’ it will perform a test of the sensor, electronics, battery and sounder
- When ‘pressed briefly’ it will Hush (silence) the sounding alarm and all interconnected (RadioLINK) alarms
- As a safety feature the Hush (silence) button will not work if the CO level detected is greater than 150ppm