Gas Soldering Kit 8 Pieces 3410  Laser

KIT INCLUDES:

Soldering Iron
Soldering Tips x 2 (3,4, & 4,8mm)
Solder In Plastic Dispenser
Tip Adaptor
Needle Tip
Hot Knife Tip
Sponge

• The soldering tool is lightweight, cordless and refillable from any butane gas canister, with integral stand for cooling periods.
• The soldering tool is lightweight, cordless with integral stand for cooling periods.
• Solder tip sizes include 3.4 and 4.6mm.
• Needle tip and hot knife tip with tip adaptor.
• Refillable from a standard gas canister.
• Storage case and sponge complete the set.

How to use your Gas Soldering Kit

Filling the Soldering Iron With Gas
Use filtered butane fuel.
Before filling make sure that the knob is pushed to the ‘OFF’ position.

Follow the directions on the butane fuel can. Applying the tip of the filler valve to the base of the soldering iron. Using a pumping action, fill the container .
A complete fill takes about 10 seconds. Allow the gas to stabilise for a few minutes, before lighting the torch.

Assembling

Screw the spring loaded tip adaptor to the soldering iron

Lighting

Push the switch towards the ‘ON’ position, enough to hear a small ‘hissing’ sound
Push the spring loaded adaptor upwards to expose the burner head through the chrome sleeve then light through the oval hole, release the adaptor to cover the burner, the tip will then heat up.

Storage

Make sure that the torch is switched to its ‘OFF’ and cool, before storing or leaving unattended.

Caution

 • The burn tip and other accessory tips get hot in operation.

• Do not touch the tip or accessories, or place them on flammable objects,

• Always wear safety glasses when using the torch.

• Always have a fire extinguisher, or bucket of water near the torch work area.

• Under no circumstances should you attempt to repair a damaged torch.

 • Never attempt to repair or heat a gasoline can, aerosol can or any compressed gas container.

 • Use only in well ventilated areas.

 • Avoid fumes from fluxes, lead based paint and all metal heating operations.

• Be especially careful to avoid fumes from cadmium plating and galvanised metal.